High Precision FTTH Fiber Fusion Splicer-OMCFS-X500

Share to:



  • Small size and light weight
  • 7s splicing and 26s heating
  • 4 motors accurate alignment technology
  • Automatic & real-time ARC calibration
  • 250 cycles splicing & heating once charged
  • Inductive heater, not heating without fiber
  • Apply to bare fiber, pigtail, drop cable etc.
  • Specially design for FTTH/FTTx projects


Applicable fiberSM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657)
Fiber countSingle
Applicable fiber dimensionsCladding diameter: 80 -150μm, Coating diameter: 160 – 900μm
Typical splice loss0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)
Return loss>60db
Fiber cleaved length10-16mm (coating diameter< 250μm ), 16mm(coating diameter: 250-1000μm )
Splicing program40 groups
Operate modeManual, Automatic
Typical splicing time7 seconds
Typical heating time26 seconds
Fiber view magnification250X(X or Y view), 125X(X and Y view)
Viewing method and display2 CMOS cameras, 4.3 inch color LCD monitor
Storage of splice result4000 results
Loss evaluationAvailable
Tension test1.8-2.2N
InterfaceGUI menu interface, easier operation
Battery capacity5200mAh, typical 250 cycles(splice and tube heat), pluggable inner Li-battery
Power supplyAdaptor, input: AC100-240V(50/60HZ), output: DC13.5V
Electrode lifeMore than 4000 ARC discharges, can be replaced conveniently
TerminalsUSB 2.0 port, for uploading splice results and upgrading software
Operating conditionAltitude: 0-5000m, Humidity: 0-95%, Temperature: -10℃~+50℃;Wind speed: max 15m/s
Weight1.90kg including battery

Featured Products

Scroll to Top