PRODUCTS
Support
Contact us
- +86-0752-3894899
- +86-0752-3894889
- sales@omcftth.com
- A1 BLDG, Sinyink intelligent Industrial park, Hongxi Avenue, zhongkai High-tech District ,Huizhou, Guangdong. P.R. CHINA,
Fiber Tools
OMC FTTH Optical Fiber Tools
In the market for communication, optical fiber tools are essential to install, test, and maintain optical networks. From splicing to monitoring and cleaning, these precision instruments ensure long-term quality. With FTTH and data centers growing at breakneck rates, the need for proper tools has never been more imperative. OMC provides an extensive range of instruments designed to simplify life and enhance network performance.
Fiber Tools Products
All the OMC fiber tools are stringently quality checked before shipping from the factory. Mechanical strength, optical calibration, and environmental resistance testing of every 100–500 sets are conducted. Reliability is guaranteed following ISO 9001 and CE certification standards. All the products are individually wrapped with shockproof and dustproof materials to ensure safe international shipping.
The Fiber Fusion Splicer is one of the most critical optical fiber tools utilized during fiber optic deployment. It aligns and splices two ends of the fibers with minimal loss and reflection, giving maximum transmission performance.
Features
- 7-second splicing and 26-second heat cycle
- Four-motor core alignment system for accurate positioning
- Automatic ARC calibration for uniform fusion quality
- Supports up to 250 splices per battery life
- Intelligent “no fiber, no heat” safety protection
- Supports bare fibers, pigtails, and drop cables
- Designed specifically for FTTH/FTTx network installation projects
Fiber installation equipment is made to make fiber preparation, cutting, and termination easier during installation. Fibertools enable technicians to finish field installations on time with clean and precise results.
Features
- Clean and accurate fiber cuts are guaranteed by precision cleavers
- Stripping tools remove coatings without compromising on fiber strength
- Crimping and connector tools provide secure terminations
- Innovative toolkits that are designed for both indoor and outdoor installations
- Anti-slip handles to ensure safety and comfort
The OTDR Launch Cable, an important component of fiber test equipment, provides a connection between the OTDR instrument and the test fiber. It removes blind zones of measurement and offers accurate loss and distance measurements.
Features
- Single-mode full-spectrum fiber, ITU-T G.657A/G.652D compliant
- Low attenuation ≤ 0.5 dB/km
- 3 length options 500 m, 1 km, 2 km, 3 km, 5 km (custom lengths option available)
- Non-metallic, water-resistant, dust-resistant structure
- Reel design is compact for convenient portability
- Ideal for field installation and all optical test environments
- Being an accuracy fiber instrument, the OTDR launch cable ensures dependable information and repeatable test precision under changing network conditions.
Clean connectors are imperative for securing strong signal transmission. Fiber cleaning tools are designed to sweep away dust, oil, and microscopic debris from connectors to provide low-loss connections and consistent performance.
Features
- MPO one-click cleaner specifically designed for MPO/MTP connectors
- Clean up to 12 fibers in a single operation
- No alcohol required, completely dry cleaning mechanism
- Until 600 cleaning procedures per instrument
- Both pinned and unpinned ferrules supported
- Compactly designed to accommodate densely populated patch panels
- Single-handing for ease of use in the field
Fiber test gear is the basis of network diagnostics. They permit engineers to verify optical performance, detect faults, and ensure stable connections. Continuous testing through these optical fiber gear ensures reliability and optimal transmission.
Features
- OTDR (Optical Time Domain Reflectometer): Identifies loss and detects faults accurately by analyzing backscattered light.
- Optical Power Meter and Light Source: Test link power levels and continuity.
- Visual Fault Locator (VFL): Emits visible red light to find breaks and steep curves.
- Fiber Identifier and Talk Set: Detects live fiber signals without interrupting services.
- Microscopic Inspector: Examines fiber end-face contamination and damage.
- Certification Tester: Tests entire performance analysis for fiber links.
FTTH tools pack is a set of multiple fiber instruments in a single convenient toolkit that provides instant, safe, and effective field fiber termination. It is dedicatedly designed for on-site FTTH network installation and maintenance.
Features
- Pre-polished fiber optic connectors are the intended design.
- No epoxy or polishing required—reduces termination time
- Waterproof and tough protection pouch
- Simplifies cable preparation and mating
- Supports safe handling of fiber off-cuts
- Lightweight and compact design for mobile applications
- Ideal for high-density networks
Applications of Optical Fiber Tools
OMC’s optical fiber tools have widespread application in all professional fields:
- Telecommunication Networks – For backbone installation and maintenance.
- Data Centers – For structured cabling and high-density optical connections.
- FTTH Projects – For field fiber termination and quick deployment.
- Industrial Automation – For machine vision and sensor-based control systems.
These application cases highlight the need and versatility of high-quality fiber tools within the optical communication industry.
OMC – Your Reliable Optical Fiber Tools Partner
Having over 15 years of experience, OMC is a well-established optical fiber tools producer with specialization in FTTH wiring solutions. We are proud of our advanced facilities, skilled technical staff, and strict quality control systems.
- Reliability & Timely Delivery – Prompt project delivery around the world.
- High-Quality Materials – Products meet or exceed industry performance standards.
- Customization – Client-specific products to suit individual client needs.
- Customer-Centric Service – Delivering prompt response, transparent communication, and personalized after-sales service.
FAQ
A1: Well-maintained, most tools remain 3–5 years under normal use.
A2: OEM/ODM customization is feasible, including packaging and logo.
A3: Calibrate 6–12 months to ensure accurate readings.
A4: OMC ships 100–500 sets per batch, depending on the customer schedule.
A5: Yes, all our products are dustproof, anti-corrosive, and field durable.