PRODUCTS
Support
Contact us
- +86-0752-3894899
- +86-0752-3894889
- sales@omcftth.com
- A1 BLDG, Sinyink intelligent Industrial park, Hongxi Avenue, zhongkai High-tech District ,Huizhou, Guangdong. P.R. CHINA,
Fullaxs Patch Cord
OMC FLX Fullaxs Patch Cord for 5G & FTTA
OMC supplies telecom operators, 5G integrators, and outdoor CPE makers with rugged optical jumpers built for harsh sites. This page focuses on our Fullaxs patch cord series, built around the Nokia-style FLX interface so installers can plug straight into RRUs, small cells, or outdoor ONUs without opening cabinets. Because the connector is fully sealed and keyed, the fullaxs cord can be handled in the field by non-fiber specialists while still keeping transmission loss very low.
- The Fullaxs patch cord uses a factory-terminated FLX connector on one side and an LC/UPC duplex on the other (other ends can be made on request). This lets you run from outdoor radio/ONU to indoor ODF in one piece.
- Typical insertion loss is ≤0.3 dB and return loss ≥50 dB, which fits most 1310/1550 nm single-mode links shown in operator specs.
- The molded fullaxs housing gives IP67-level sealing, so rain, dust, or occasional washing of the cabinet won’t affect it.
- The FLX bayonet structure is simple: align, push, turn; no extra tools. That makes a Fullaxs patch cord faster to mount than a normal bulkhead+patch combo.
- Cables can be 1 m, 2 m, or long custom lengths so you can lay them directly along the wall or pole without extra splicing.
Quality Inspection and Delivery
- Every Fullaxs patch cord is 100% tested for IL/RL, end-face quality and polarity before it leaves OMC.
- We normally pack them in anti-static bags with label, test data, and length ID so warehouse teams can check at a glance.
- For project orders, we can supply batches of several hundred cords in one shipment, grouped by length.
- This keeps the FLX stock on site consistent and reduces mixing. Traceability codes are printed on the cable jacket and on the fullaxs connector cap.
Application Scenarios
- 5G/4G outdoor RRU connection where an FLX front port is already on the equipment.
- FTTA/FTTR small site where you want a pre-terminated FTTR indoor line to jump to the outdoor box.
- Outdoor Wi-Fi or video surveillance poles that need a sealed fullaxs jumper down to the bottom splice box.
- Temporary exhibition or event networking, because the Fullaxs patch cord can be plugged and removed quickly without cleaning tools.
In all of these, using an OMC Fullaxs patch cord avoids on-site polishing and keeps the liquid-tight FLX interface intact.
FAQs
Q1: Can I order different lengths in one PO?
Yes, mixed 1 m / 3 m / 5 m Fullaxs patch cord in one batch is fine, we label them separately.
Q2: Is this connector compatible with standard LC?
One side is FLX/fullaxs, the other side can be LC, SC or DLC according to your equipment.
Q3: What is the operating temperature?
Our outdoor Fullaxs patch cord works from −40°C to +85°C, suitable for towers and street cabinets.
Q4: Do I need special tools to install?
No. The FLX bayonet is hand-operated; just make sure the port is clean.
Q5: Can OMC print my project code on the jacket?
Yes, we can print customer codes or meter marks to help field teams.
Why OMC
OMC has long experience with outdoor fiber, so we match the right cable diameter to the connector, keep bending radius within spec, and suggest fixing points for vertical runs. We also keep FLX accessories, caps and dust covers in stock, which makes later maintenance simpler.
If you need special jackets or armored sub-units, tell us the installation route and we will build the double-sheath fullaxs version for you. Contact us directly on the product page to get price and lead time. This way you get a sealed, easy-to-install Fullaxs patch cord, proven FLX performance, and OMC’s project-level service on top of it.