Handhold ARC Fusion Splicer-OMCFS-X600

Share to:

Description

Features

  • Small, light, long battery life
  • 4 motors accurate cladding alignment
  • 250 times magnification of fiber cores
  • 7s fast splicing, 26s intelligent heating
  • More than 4000 times electrodes discharging
  • 4400mAh Li-batery, 220 cycels splicing and heating
  • Inductive automatic heater, not heating without fibers
  • 3 in 1 multi-function clamps, new waterproof structure
  • Apply to bare fibers, drop cables and jumper wires splicing

Specification

Applicable fiberSM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657)
Diameter of cladding80 -150μm
Diameter of coating160 – 900μm
Typical splice lossSM:0.02dB, MM:0.01dB, DS:0.04dB, NZDS:0.04dB
Return loss>60db
Fiber cleaved length10-16mm (coating diameter< 250μm ), 16mm(coating diameter: 250-1000μm )
Splicing program40 groups
Operate modeManual, Automatic
Auto-heatingAvailable
Typical splicing time7seconds
Tube heating time26 seconds for 60mm and 40mm shrinkable sleeves
Fiber view magnification250X(X or Y view), 125X(X and Y view)
Viewing method and display2 CMOS cameras, 4.3 inch color LCD monitor
Storage of splice result4000 results
Loss evaluationAvailable
Tension test1.8-2.2N
InterfaceGUI menu interface, easier operation
Battery capacity4400mAh Li-battery, typical 220 cycles(splice and tube heat)
Power supplyAdaptor, input: AC100-240V(50/60HZ),output: DC11-13.5V
Electrode lifeMore than 4000 ARC discharges, can be replaced conveniently
TerminalsUSB 2.0 port, for uploading splice results and upgrading software
Operating conditionAltitude: 0-5000m, Humidity: 0-95%, Temperature: -10℃~+50℃;Wind speed: max 15m/s
Dimension200mm(L)x123mm(W)x95mm(H)
Weight1.6kg including battery
PackagePacked in carton with protection foam, Size 43cm*37cm*27cm, G.W.6.3kg

Featured Products

Scroll to Top