Special designed cross-linked Clear Heat Shrinkable tubing, with Clear fusion tubing liner, providing strength member and protection to fiber optical splices. Consist of 1/2 Ceramic rod, hot fusion tubing and cross-linked polyolefin. To rebuild the coating of fiber, providing mechanical strength at the fusion joint area and keeping optical transmission properties.
Specification
Product dimensions
| Part
Number |
Item
Number |
Sleeve
Length （L）（mm） |
Hot melt Tube（D）
(mm） |
Ceramic rods（d） | |
| Width
(mm） |
Height （mm） | ||||
| FOSP-4RD
Single ceramic |
38132235 | 42±0.8 | 1.3*2.2 | 3.0±0.1 | 1.5±0.1 |
| FOSP-4RS
Dual ceramic |
46132240 | 42±0.8 | 1.3*2.2 | 3.0±0.1 | 1.5±0.1 |
| FOSP-6RD
Single ceramic |
38182843 | 42±0.8 | 1.8*2.8 | 3.0±0.1 | 1.5±0.1 |
| FOSP-6RS
Dual ceramic |
45182846 | 42±0.8 | 1.8*2.8 | 3.0±0.1 | 1.5±0.1 |
| FOSP-8RD
Single ceramic |
48243455 | 42±0.8 | 2.4*3.4 | 4.0±0.1 | 2.0±0.1 |
| FOSP-8RS
Dual ceramic |
55243458 | 42±0.8 | 2.4*3.4 | 4.0±0.1 | 2.0±0.1 |
| FOSP-12RD
Single ceramic |
49243558 | 42±0.8 | 2.4*3.5 | 4.0±0.1 | 2.0±0.1 |
| FOSP-12RS
Dual ceramic |
58243560 | 42±0.8 | 2.4*3.5 | 4.0±0.1 | 2.0±0.1 |
Technical data
| Performance | Test Method | Typical data |
| Tensile strength（MPa） | ASTMD 2671 | 18 |
| Elongation at break (%) | ASTMD 2671 | 700 |
| Density (g/cm2) | ISO R1183D | 0.94 |
| Dielectric strength (KV/mm) | IEC 243 | 20 |
| volume resistance | ASTM0876 | 10 14Ω |
| Length changes (%) | ASTMD 2671 | ±5 |
Applications
Manufactured by cross-linked polyolefin, ceramic rod, and hot fusion tubing. Specially designed to rebuild the coating of fiber, providing mechanical strength at the fusion joint area and keeping optical transmission properties.
Characteristics
Moisture resistant and environmental protection
Simple operation, avoid any damages to optical fiber during installation.
Operating temperature range
Operating temperature: 45℃-100 ℃/55℃-130 ℃
Minimum shrink temperature : 80℃
Minimum fully recovery temperature: 120℃
