Home » Products » FTTX Preconnectorized Products » FTTA Nap Fiber Distribution Box-8 ports MiniSC

FTTA Nap Fiber Distribution Box-8 ports MiniSC

Share to:

Description

The FTTX Pre-connectorized Terminal Box PTB-8D is used as a termination box for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building. It can offer 8 FTTH subscribers access points.

Features

Total enclosed structure.
Material:PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up to IP65.
Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution…etc all in one.
Cable, pigtails, and patch cords are running through their own paths without disturbing each other, micro type PLC splitter installation, easy maintenance.
Distribution panel can be flipped up, feeder cable can be placed by expression port, easy for maintenance and installation.
Box can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor use.

Specification

Model No.	PTB-8D	Color	Grey,Black,White.
Capacity	8ports SC+36F Splice	Protection Level	IP65 Indoor/Outdoor
Material	PC+ABS, ABS	Flame retardant performance	Non-flame retardant
Dimension(LWD,)	319.3x200x97.5mm	Splitter	Can be with 2×1:4 Plug in splitter or 1×1:8 plug-in Splitter
Input Cable OD	1mid span(Φ16mm Max), 2cable gland(Φ8-14mm)	Output Adapter	8x Mini SCAPC waterproof adapters<0.2dB
Installation Method	Wall&Pole mounted	Insertion loss	≤0.2dB（1310nm & 1550nm)

Splice tray details

Mold	SPTB8D-A
Dimension(mm)	1341048
Material	PC+ABS, ABS
Capacity	12F, 1 slot for 1/8 PLC

Mold	SPTB8D-B
imension(mm)	1341044
Material	PC+ABS, ABS
Capacity	8

Environmental requirement

Working temperature：-40℃～+85℃

Relative humidity：≤85%（+30℃）

Atmospheric pressure：70KPa～106Kpa

Main technical datasheet:

Insertion loss：≤0.2dB

UPC return loss：≥50dB

APC return loss：≥60dB

Thunder-proof technical datasheet

The insulation resistance between the grounding device and the metal parts of the box is no less than 2 x 10⁴ MΩ/500V（DC）；IR≥2×10⁴ MΩ/500V, The voltage resistance between the grounding device, and the box and its metal

parts is no less than 3000V（DC）/min, no puncture，no flashover；U≥3000V

1.Wall-mounted installation

Drill 3 holes into the wall based on the size in table 1, place the expansion bolt Φ7.5*40,

place the box to match up the holes and use bolt to fasten