The fiber optic pigtail is normally a tight/semi-tight buffered fiber cable with a connector pre terminated on one end and exposed fiber on the other. The end is stripped and fusion spliced to a single or multi-fiber trunk. When utilized properly, the fiber optic pigtail allows light signal transmission with minimal return loss and low attenuation. Make sure your network is reinforced with OMC’s fiber pigtails, as ours are manufactured of superior quality materials.
This 9/125 OS2 single mode fiber optic cable is ideal for connecting 1G/10G/40G/100G/400G Ethernet connections. It can transport data for up to 10km at 1310nm, or up to 40km at 1550nm.
Products Materials
| Items | Description | ||
| Number of fiber | 1F | ||
| Fiber type | G657A2 | ||
| Loose Buffer | Material | PVC | |
| Diameter | 0.9±0.05mm | ||
| Strength member | Material | Kevlar yarn and E-glass yarn | |
|
Inner sheath |
Material | LSZH | |
| Color | White | ||
| Diameter | 2.8-2.95mm | ||
|
Outer sheath |
Material | LSZH | |
| Color | Black | ||
| Diameter | 5.0±0.2mm | ||
| Cable weight | 25.5kg/km | ||
| Installation Temperature range（℃） | -10+60 | ||
| Operation and transport temperature（℃） | -20+70 | ||
| Min Bending Radius(mm) | Long term | 10D | |
| Min Bending Radius(mm) | Short term | 20D | |
| Min allowable Tensile Strength(N) | Long term | 100 | |
| Min allowable Tensile Strength(N) | Short term | 350 | |
| Crush Load (N/100mm) | Long term | 100 | |
| Crush Load (N/100mm) | short term | 500 | |
