8/12/24 Fibers MTP SM /MM Female Fiber Loopback Module
MTP Loopback modules provides a looped signal to test the transmit and receiving functions.
It used widely within testing environment especially within parallel optics 40 and 100G networks.
8F MTP Fiber Loopback Module allows verification and testing of transceivers featuring MTP interface – 40GBASE-SR4/CSR4 QSFP+ devices.
12F MTP Fiber Loopback Module allows verification and testing of transceivers featuring MTP interface – 40GBASE-SR4 QSFP+ or 100GBASE-SR4 devices.
24F MTP Fiber Loopback Module allows verification and testing of transceivers featuring MTP interface – 100GBASE-SR10 CXP/CFP devices.
Loopbacks are built to link Transceivers (TX) and Receivers (RX) positions of MTP transceivers interfaces. MTP loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MTP trunks/patch leads.
Please Note: MTP is a registered trademark of US Conec Ltd. The US Conec MTP connectors are fully compliant with the MPO standards, achieving higher performance levels when compared to generic MPO connectors.
|Fiber Type||Singlemode or Multimode|
|Fiber Diameter||9/125um, 50/125um, 62.5/125um|
|Insertion loss||MM＜1.2dB, SM(G652D)＜1.5dB,SM(G657A1)＜0.75dB|
|Return loss||SM＞55dB; MM＞25dB|
|Insert-pull Test||500times, IL＜0.5dB|
|Operation Temperature||-40℃~ +80℃|
12-MTP VS 24-MTP
12-fiber MTP interface for 40 Gig means 4 lanes at 10 Gig per lane over singlemode or multi-mode fiber for a total of 8 fibers (i.e.,4 transmit and 4 receive).
24-fiber MTP interface for 100 Gig means 10 lanes at 10 Gig per lane over singlemode or multi-mode fiber for a total of 20 fibers (i.e.,10 transmit and 10 receive).
·Data Centre Infrastructure
·Storage Area Network- Fiber Channel
·Emerging 40 and 100Gbps Protocols
Application in Data Center
Collocated with 40G or 100G MPO/MPO interface transceivers
Loopback Module can be used for testing the transmission capability and receiver sensitivity of fiber optic network equipment.