LC Fast Install connector

LC Fast Install connector

CO Subsystem

Product Detail

Product Tags

Fast assemblies connector (Field installation connector

Field installation connector is a new kind of connector that could be used in FTTH project scene. They don’t need to polishing, no epoxy. They could be installed in the field and make connection less than two minutes. Of course, It don’t need fused the fiber. Just some little tools enough, so it could save time and cost.

The Field Assembly Connector products have been factory-polished, eliminating the need for any polishing materials, thereby enabling the preparation and termination of optical fibres in a fraction of the time of other conventional methods. The connector also uses V-groove mechanical splice principals and therefore the use of an epoxy is not required for the termination of the connector. This Fast Connector offers convenience in assembling and strong stability. It allows simple optical core connection without any additional practices, or adhesives. It does not require a working space by connecting itself in the challenging environments such as a telephone pole and a manhole. It reconnects the cables and reduces the connection defect rate by an installer error in the field.

Assembly of the LC type quick connector requires only normal fiber preparation tools: a fiber stripping tool, wipes and a fiber cleaver. No electrical power supply is needed. Just Strip the buffer, cleave and clean the fiber and then insert the fiber into the Fast Connector.Installation takes just minutes and couldn’t be easier.
The Field Assembly Connector series are already a popular solution for optical wiring inside buildings and floors for LAN & CCTV applications and with the expansion of FTTH, is already proving itself to be the connector of choice by incumbents, municipalities, utilities & alternative carriers. Our Field Assembly Optical Connector series are now available in SC, LC, or FC variants, catering for 250um to 900um, and 2.0mm, 3.0mm diameter single mode and multimode fiber types, including Multi-mode 62.5/125um and Multi-mode 50/125um. The single-mode versions are available with SPC or APC ferrules.

Working principle



  • Polishing way is UPC or APC
  • Connector type is SC/FC/LC and could match with normal SC/FC/LC  adapter
  • Related cable is Bow-type drop cable 2.0*3.1 or normal 3.0mm.
  • Good performance and high success rate
  • Easiness in installation
  • Special tool is simple and convenient to use


Items  Test  condition Value
Optical performance Insertion Loss(1310nm&1550nm) <0.2dB(typical)/ 0.5dB(Max)
Return Loss(1310nm&1550nm) UPC>40dB,APC>50dB
Environmental Performance(Max. Insertion Loss change) Temperature Cycle -20°C ~+70°C (96hours) <0.2dB
Mechanical Performance(Max. Insertion Loss change) Online tension 20N- 100N <0.2dB
Impaction 3 axis/3times 4m high <0.2dB
Repeated operation times 5

Application in FTTX: offering a stronger and quickly optical link connection between ONU and optical Network. Save time and cost.



  • Previous:
  • Next:
  • Related Products

    WhatsApp Online Chat !