MPO (male)-LC/SC/FC/ST Fan-out 0.9mm 30cm patch cable are designed for MPO-LC LGX module cassettes are terminated with MPO and LC/SC/FC/ST connector on each end. It's specifically designed for high-density fiber patch-ing in data centers which need space saving and reduce cable management troubles.
SM 8F MPO-LC/SC/FC/ST Fanout 0.9mm cable are optimized for 40G QSFP+ PLR4 to 10G SFP+ LR optics direct connection and high-density data center applications.
OM3/OM4 8F MPO-LC/SC/FC/ST Fanout 0.9mm cable are op-timized for 40G QSFP+ SR4 to 10G SFP+ SR, 100G QSFP SR4 to 25G SFP-25G-SR-S optics direct connection and high-density data center applications.
This 8 Fiber harness cable is used for a direct connection between QSFP+ to (4) SFP+ ports with no patch panels or intermediate trunks in between.
● 100% pre-terminated and tested in factory to ensure transfer performance.
● Low insertion loss, high return loss
● MT based Multi-fiber Connector, 4,8,12 and 24 fiber connector terminations and assemblies
● Economical solution for mass-termination of fiber
● Designed for low loss and standard loss SM and MM applications
● Ruggedized round cable, oval cable and bare ribbon options available
● Color coded housings available to differentiate fiber type, polish type and/or connector grade
● Good in repeatability and exchangeability
● Data communication network.
● Optical System Access network.
● Storage area networking fiber channel.
● High density architectures.
Optical Specifications
Spec items. | Single mode (APC 8-degree polished) | Multimode (PC Flat polish) |
Insertion loss (MPO) (IEC 61300-3-34) | Standard loss:≤0.75dB(max), ≤0.50dB(Typical) Super Low loss:≤0.35dB(max), ≤0.20dB(Typical) | Standard loss:≤0.6dB(max), ≤0.50(Typical) Super Low loss:≤0.35dB(max) , ≤0.20dB(Typical) |
Insertion loss (LC/SC/FC/ST) (IEC 61300-3-6) | ≤0.3dB | ≤0.3dB |
Return loss(MPO) | ≥60dB(8degree polishing) | ≥25dB |
Return loss(LC/SC/FC/ST) | APC≥60dB; UPC≥50dB | ≥35dB |
Durability | <0.3dBtypical change, 200 matings | |
Interchangeability | ≤0.2dB | |
Tensile strength | >70N | |
Operating Temperature | -40 to + 85°C |
MPO End-Face 3D Interference Index
Item (IEC-61300-3-30) | Minimum | Maximum | ||
Radius of curvature (mm) | ROC-X(ABS) | 2000 | \ | |
ROC-Y(ABS) | 50mm | \ | ||
Angle | Angle-X | -0.2° | -0.2° | |
Angle-Y | APC | 7.85° | 8.15° | |
PC | -0.2° | -0.2° | ||
Fiber height (nm) | 1000nm | 3500nm | ||
Max.DH.All Fiber: | -300nm | 300nm | ||
DH.Adj: | -300nm | 300nm | ||
DH.Ave Fiber: | -300nm | 300nm | ||
Core Dip: | SM | N/A | N/A | |
MM | -200nm | 300nm |
LC/SC/FC/ST End-Face Geometry 3D Interference Index
Items | Connector | PC End-face | APC End-face |
Radius of Curvature | SC/FC/ST | 10~25 mm | 5~12 mm |
LC/MU | 7~25 mm | 5~15 mm | |
Apex Offset | ≤50 um | ||
Fiber Spherical Height | +/- 100 nm | ||
Angular Offset | ------ | 8°± 0.5° |
End-face Quality (LC/SC/FC/ST SM)
Zone | Range (μm) | Scratches | Defects | Reference |
A: Core | 0 to 25 | None | None |
IEC 61300- 3-35:2015 |
B: Cladding | 25 to 115 | None | None | |
C: Adhesive | 115 to 135 | None | None | |
D: Contact | 135 to 250 | None | None | |
E: Rest of ferrule | None | None |
End-face Quality (LC/SC/FC/ST MM)
Zone | Range (μm) | Scratches | Defects | Reference |
A: Core | 0 to 65 | None | None |
IEC 61300-3 -35:2015 |
B: Cladding | 65 to 115 | None | None | |
C: Adhesive | 115 to 135 | None | None | |
D: Contact | 135 to 250 | None | None | |
E: Rest of ferrule | None | None |
Connector | Reference | Housing Details |
MPO Singlemode | IEC 61754-7 | SM APC: Green connectors+black boot (Standard Loss MPO) SM APC: Yellow connectors+black boot (Super low loss MPO) |
MPO Multimode |
IEC 61754-7 | OM1&OM2 PC: Beige connectors+black boot (Standard Loss MPO) OM3&OM4 PC: Aqua connectors+black boot (Standard&Super low loss MPO) OM3&OM4 PC: Heather Violet connectors+black boot (Standard loss MPO) |
Meets IEC Standard IEC-61754-7; IEC61755, Telcordia GR-1435-CORE, JIS C5982; TIA-604-5(FOCIS5) compliant
Structured cabling per TIA-568-C 10G Fiber Channel Compliant
Other connectors' Industrial Standard:
SC: TIA/EIA, FOCIS3, GR-326.NTT-SC IEC61754-4 and JIS C5973.
LC: TIA/EIA, FOCIS10, GR-326 EIA/TIA-604-10, IEC61754-20 and JIS C5973. FC: EIA /TIA-604-04, FOCIS4, NTT-FC, GR-326. IEC61754-13 and JIS C5973 ST: TIA/EIA, FOCIS2, GR-326. IEC61754-2 and JIS C5973 Etc.
E2000: IEC61754-15
Available for
G657A1 MPO-LC, MPO-SC,MPO-FC,MPO-SC,MPO-ST,MPO-E2000
G657A2/B2 MPO-LC, MPO-SC,MPO-FC,MPO-SC,MPO-ST,MPO-E2000
G657B3 MPO-LC, MPO-SC,MPO-FC,MPO-SC,MPO-ST,MPO-E2000
OM1 62.5/125 MPO-LC, MPO-SC,MPO-FC,MPO-SC,MPO-ST,MPO-E2000
OM2 50/125 MPO-LC, MPO-SC,MPO-FC,MPO-SC,MPO-ST,MPO-E2000
OM3 50/125 MPO-LC, MPO-SC,MPO-FC,MPO-SC,MPO-ST,MPO-E2000
OM4 50/125 MPO-LC, MPO-SC,MPO-FC,MPO-SC,MPO-ST,MPO-E2000
OM5 50/125 MPO-LC, MPO-SC,MPO-FC,MPO-SC,MPO-ST,MPO-E2000
Packaging
This easily taken and well-protected fiber patch cable package has been labelled and marked by OMC as de-
fault .Standard carton size : 34*22*15 cm; 44*34*24 cm ; 54*39*34 cm . Which carton to be used depends on goods Qty . Packing can be customized.