OMC INDUSTRY CO.LIMITED (SHENZHEN OMC COMMUNICATION CO.LIMITED)
1, 10 years Professional Manufacture Experience.
2, ISO certificated company
3, 3 x Patch cabling products factories.
4, 1 x fiber optic cable factory.
5, Over 200 employees.
Product Name : 48F MPO(Female) - MPO(Female) 3.0mm Trunk Cable Connector : MPO(Female) To MPO(Female) Fiber Cores : 48F Certification : Telcordia GR-1435-CORE Compliant Application : FTTX+LAN,Testing Equipment,Telecommunication Networks,Etc
MPO（Female）-MPO（Female）trunk cable is terminated with MPO connector on both ends. MPO trunk cables connect MPO modules together as a permanent link. The trunk cables are available with 24F,48F,60F,72F ,96F,144F. Support speeds up to 10/40/100Gbps data center solutions. They are typically adopted to interconnect cassettes, panels or ruggedized MPO fan-outs, and to facilitate rapid deployment of high-density backbone cabling in data centers and other high fiber environments. Besides, MPO also provides much flexibility and convenience once you have to change the connector style in the patch panels. Instead of changing the connector on the cable trunk, just installing a new cassette with the new connector style on the cross-connect side of the patch panel.
The merits of MTP/MPO Patch cable/trunk cable generally include:
High quality—MTP/MPO Patch cable/trunk cables are factory pre-terminated, tested and packaged along with the test reports. These reports serve as long-term documentation and quality control.
Decreasing cable volume—MTP/MPO Patch cable/trunk cables have very small diameters, which decrease the cable volume and improve the air-conditioning conditions in data centers.
Time saving—With the special plug and play design, MTP/MPO Patch cable/trunk cables can be incorporated and immediately plugged in. It greatly helps reduce the installation time.
All of OMC’s MPO Connectors are from Senko/Nissin/Sumitomo. MPO Patch cable/trunk cable is a kind of high density cable assemblies which is generally use in three areas.
1, The Data Center application with high dense degree environment
2, The optical fiber to the building
3, The internal connector application in fiber equipment.
The 12F MPO-MPO Patch cable/trunk cable is designed for 40G QSFP+ SR4, 40G QSFP+ CSR4 and 100G QSFP28 SR4 optics direct connections and high-density data center.
The 24F MPO-MPO Patch cable/trunk cable is designed for 100GBASE-SR10 CXP/CFP Interconnect Solution,100GBASE-LR4 and high-density data center.
MPO Patch cable/trunk cable ’s Specification:
Single mode (APC 8-degree polished)
Multimode (PC Flat polish)
Insertion loss (MPO)
Standard loss：≤0.75dB(max), ≤0.35dB(Typical)
Super Low loss：≤0.35dB(max), ≤0.20dB(Typical)
Standard loss：≤0.6dB(max), ≤0.35(Typical)
Super Low loss：≤0.35dB(max) , ≤0.20dB(Typical)
<0.3dBtypical change, 200 matings
-40 to + 85°C
MPO Connector Types
MPO Female Connectors
12 Fibers per one/24 Fibers per one
Note: Female connector need to connect with male connector type.
Cable Parameters-24-144F Microfiber cable
36 & 48 &72
Subunit diameter (mm)
Temperature rating Operation&Storage
MPO products’ Details& Standard:
MPO Single Mode
SM APC: Green connectors+black boot (Standard Loss MPO)
SM APC: Yellow connectors+black boot (Super low loss MPO)
OM1&OM2 PC: Beige connectors+black boot (Standard Loss MPO)
OM3&OM4 PC: Aqua connectors+black boot (Standard&Super low loss MPO)
OM3&OM4 PC: Heather Violet connectors+black boot (Standard loss MPO)
· Meets IEC Standard IEC-61754-7; IEC61755, Telcordia GR-1435-CORE, JIS C5982; TIA-604-5(FOCIS5) compliant
· Structured cabling per TIA-568-C
· 10G Fiber Channel Compliant
· 40G and 100G IEEE 802.3
MPO End-Face 3D Interference Index
Radius of curvature (mm)
Fiber height (nm)
length of tolerance(cm)
+0.5% x L/-0
Pre-terminated MPO Technology-Polarity
Ribbon and bundle cable available;
Patch cord, pigtail cable assemblies available.
MT-MT ribbon patch cord is available.
MPO Loopback available
HD Data center cabling connection.
Low insertion loss, high return loss
MT based Multi-fiber Connector, 4,8,12 and 24 fiber connector terminations and assemblies
Economical solution for mass-termination of fiber
Designed for low loss and standard loss SM and MM applications
Ruggedized round cable, oval cable and bare ribbon options available
Color coded housings available to differentiate fiber type, polish type and/or connector grade
Good in repeatability and exchangeability
Data communication network.
Optical System Access network.
Storage area networking fiber channel.
High density architectures.