MTP-MTP trunk cable 12F/24F

MTP-MTP trunk cable  12F/24F

INQUIRY DETAILS *

INQUIRY DETAILS
  • captcha

CO Subsystem

Product Detail

Product Tags

MTP-MTP 12F/24F trunk cable 

MTP Fiber Trunk cable is terminated with MTP connector on both ends. MTP trunk cables connect MTP modules together as a permanent link. The trunk cables are available with 12, 24, 48 and 72 fibers. Support speeds up to 10/40/100Gbps data center solutions. They are typically adopted to interconnect cassettes, panels or ruggedized MTP fan-outs, and to facilitate rapid deployment of high-density backbone cabling in data centers and other high fiber environments. Besides, MTP also provides much flexibility and convenience once you have to change the connector style in the patch panels. Instead of changing the connector on the cable trunk, just installing a new cassettes with the new connector style on the cross-connect side of the patch panel.

The merits of MTP trunk cable generally include:

High quality—MTP trunk cables are factory pre-terminated, tested and packaged along with the test reports. These reports serve as long-term documentation and quality control.

Decreasing cable volume—MTP trunk cables have very small diameters, which decrease the cable volume and improve the air-conditioning conditions in data centers.

Time saving—With the special plug and play design, MTP trunk cables can be incorporated and immediately plugged in. It greatly helps reduce the installation time.

 MTP Trunk Patch cable is terminated with MTP connector on both ends. All of OMC’s MTP Connectors are from US Conec. MTP Trunk cable is a kind of high density cable assemblies which is generally use in three areas.

  • 1, The Data Center application with high dense degree environment
  • 2, The optical fiber to the building
  • 3, The internal connector application in fiber equipment.

The 12F MTP-MTP Trunk cable is designed for 40G QSFP+ SR4, 40G QSFP+ CSR4 and 100G QSFP28 SR4 optics direct connections and high-density data center.

The 24F MTP-MTP Trunk cable is designed for 100GBASE-SR10 CXP/CFP Interconnect Solution,100GBASE-LR4 and high-density data center.

Please Note: MTP is a registered trademark of US Conec Ltd. The US Conec MTP connectors are fully compliant with the MPO standards, achieving higher performance levels when compared to generic MPO connectors.

MTP products’ Standard& Compliant:

  • Meets IEC Standard IEC-61754-7; JIS C5982; TIA-604-5(FOCIS5); Telcordia GR-1435-CORE compliant
  • Structured cabling per TIA-568-C
  • Parallel Optics
  • Optical Internetworking Forum (OIF) Compliant
  • InfiniBand Compliant
  • 10G Fiber Channel Compliant
  •  40G and 100G IEEE 802.3 Compliant
  •  QSFP Compliant

MTP Trunk cable’s Specification:

 MTP's loss

MTP Interference index :

Connector type

Testing items

Min

Max

MTP  PC

ROC_X(abs)(mm)

500

\

ROC_Y(abs)(mm)

50

\

Angle_X(deg)

-0.2

0.2

Angle_Y(deg)

-0.2

0.2

Max.DH.All Fiber(nm)

-600

600

Max.DH.Ave(nm)

-300

300

Max.DH.Adj(nm)

-300

300

Max. Core Dip(nm)

-300

300

Fiber height(nm)

-300

300

ROC_X(abs)(mm)

1000

3000

MTP  APC

ROC_X(abs)(mm)

500

\

ROC_Y(abs)(mm)

50

\

Angle_X(deg)

-0.2

0.2

Angle_Y(deg)

7.8

8.2

Max.DH.All Fiber(nm)

-600

600

Max.DH.Ave(nm)

-300

300

Max.DH.Adj(nm)

-300

300

Fiber height(nm)

MTP Connector Types

 2

 1

MTP Male with Pins

MTP Female without Pins

Two other clearly visible features are the noses and guide grooves (keys) on the top side.

(Note: Female connector need to connect with male connector type.)

 

Pre-terminated MTP Technology-Polarity

 12F

3

24F

24F MTP Polarity method

Cable Structure:

drawing

AVAILABILITY:

  • Ribbon and bundle cable available;
  • Patch cord, pigtail cable assemblies available.
  • MT-MT ribbon patch cord is available.
  • MTP Loopback available

Features:

  • Low insertion loss, high return loss
  • MT based Multi-fiber Connector, 4,8,12 and 24 fiber connector terminations and assemblies
  • Economical solution for mass-termination of fiber
  • Designed for low loss and standard loss SM and MM applications
  • Ruggedized round cable, oval cable and bare ribbon options available
  • Color coded housings available to differentiate fiber type, polish type and/or connector grade
  • Good in repeatability and exchangeability

20170106181810_130

How to Choose The Right Fiber Optic Cable Type?

PS: The difference of OM4 and OM3 fiber mode as the following
1. OM4 was developed specifically for VCSEL laser transmission and allows 10 Gig / second link distances of up to 550 Meters (compared to 300M with OM3).
2. The effective modal bandwidth for OM4 is more than double that of OM3.
3. For OM4 patch cable it is 4700 MHz.km while for OM3 it is 2000 MHz.km.

Designation

Fiber Dia.(μm)

Type

10Gbps Ethernet 10GBASE SR/LR

40Gbps Ethernet 40GBASE SR4/PLRL4

100Gbps Ethernet 100GBASE SR10/IR4

OM1

62.5/125

Multimode

33 Meters (SR)

Not supported

Not supported

OM2

50/125

Multimode

82 Meters (SR)

Not supported

Not supported

OM3

50/125

Multimode

300 Meters (SR)

100 Meters (SR4)

100 Meters (SR10)

OM4

50/125

Multimode

400 Meters (SR)

150 Meters (SR4)

150 Meters (SR10)

Singlemode

9/125

Singlemode

10KM at 1310nm (LR)

1KM (PLRL4)

2KM (IR4 PSM)

High Quality MTP Cable Guarantee

1. High-performance polishing machine, and complemented by precision plates holders designed for MT ferrules.
2, 3D interferometer provides verification of MTP/MPO polishing process, and making all parameters of the polished MT ferrule complies and exceeds industry standards.
3. The flexibility of the tester provides the complete spectrum of optical testing required for complex and high fiber count cable assemblies.

流程

  • Previous:
  • Next:
  • Related Products

    INQUIRY DETAILS *

    INQUIRY NOW
    • captcha