Figure 8 cable (GYTC8A/ GYTC8S)

Figure 8 cable (GYTC8A/ GYTC8S)

INQUIRY DETAILS *

INQUIRY DETAILS
  • captcha

CO Subsystem

Product Detail

Product Tags

Figure 8 cable (GYTC8A/ GYTC8S)

Product details

The fibers, 250µm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. After an Aluminum Polyethylene Laminate (APL) or PSP moisture barrier is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene (PE) sheath to be figure 8 structures.

OMC figure 8 cable GYTC8Y, GYTC8S are also available on request. This type of cable is specifically applied for self-supporting aerial installation.

Characteristics

High tensile strength of stranded wires meet the requirement of self-supporting and reduce the installation cost.

Good mechanical and temperature performance

High strength loose tube that is hydrolysis resistant

Special tube filling compound ensure a critical protection of fiber

The following measures are taken to ensure the cable watertight:

Steel wire used as the central strength member

Loose tube filling compound

100% cable core filling

APL moisture barrier

Standards IEC 60794-1.

 

 

 

Technical Parameters.

Part No.

Fibers

Tubes

Cable OD

(mm)

Weight

Kg/km

Tensile strength

Long term/short term

(N/1m)

Crush resistance

Long term/short term

(N/1m)

Bending Radius

Static/Dynamic

(mm)

GYTC8A -2~6X

2~6

1

6.8×9.2×18

214

600/1500 300/1000

10D/20D

GYTC8A -8~12X

8~12

2

6.8×9.2×18

214 600/1500 300/1000 10D/20D

GYTC8A -14~18X

14~18

3

6.8×9.2×18

214 600/1500 300/1000 10D/20D

GYTC8A -20~24X

20~24

4

6.8×9.2×18

214 600/1500 300/1000 10D/20D

GYTC8A -26~30X

26~30

5

6.8×9.2×18

214 600/1500 300/1000 10D/20D

Note: 

Suffix X denotes fiber type.

The nominal value of the PE sheath thickness: The cable core is 1.5mm, The suspension core is 0.8mm,

The suspension steel wires with two dimension with diameter of 1.2mm and 1.6mm.

  • Previous:
  • Next:
  • Related Products

    INQUIRY DETAILS *

    INQUIRY NOW
    • captcha