Female to Female fixed attenautor

Female to Female fixed attenautor


  • captcha

CO Subsystem

Product Detail

Product Tags

Female to Female fixed attenautor

Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver. Optical attenuator is widely used in CWDM&DWDM, CATV systems, data center networks, test equipment and other high power applications.

Female to female Fixed attenuators from OMC offer defined control of optical signals in both integrated and add-on products. Depending on the project or need, fixed attenuators can limit (attenuate) the amount of light passing through to the exact levels your project or application requirement. These precise attenuation levels provide for highly accurate performance.

OMC fixed attenuators are used in applications where a pre-determined amount of light loss is specified. Though its applications range widely, fixed attenuators are most commonly used for test and measurement, optical sensors, and telecommunications applications.


Attenuator Specifications

  • Operating Bandwidth: 1310nm or 1550nm
  • Return Loss: UPC≥50db, APC≥60db
  • Attenuation Tolerance:  1~5db±0.5db &6~25db±10%
  • Vibration: ≤0.1db change between 10~55hz (2hr)
  • Polarization Dependent Loss: ≤0.2db
  • Operating temp:- 40°C to +85°C
  • Drop: +/-0.2dB after 8 drops (3axes) from 1.8 Meter onto a hard surface.



  • DWDM applications
  • Test & measurement
  • Optical sensors
  • Telecommunications applications
  • Previous:
  • Next:
  • Related Products


    • captcha